DECKING INSTALLATION - Make sure the foundation is flat and stable. - Always comply with the recommended mounting distance. - Due to the materials thermal expansion, keep allowance around your terrace. - Never install the floor boards on the head closed to next, apply at least 5mm space between the boards. - To ensure proper drainage, the deck should slope minimum 0.5cm/m. - Every single end of the board should be supported and fixed. If it occurs that the board is ended without covering the support completely, at least 3cm of the board has to be sustained. - The startup and finishing plank could be fixed by the screws in the side groove of the boards. - To avoid cracking, pre-drilling is recommened where screws are to be fixed closer than 3 cm to the end of a board. - Store the boards and supports horizontally and flatly when you don't install them immediately.